Adding squads to a campaign and reinf/supply :)
Moderators: Lone Wolf, Snake Man
-
- Newbie
- Posts: 6
- Joined: 2009-09-27 21:15:05
- Gaming Interests: Falcon 4.0
- Editing Interests: Terrains
Adding squads to a campaign and reinf/supply :)
And i wanted to know if there were other steps besides simply adding them and rebuilding the squadrons?
Ive looked at some threads but can't find a clear answer.
Ive looked at some threads but can't find a clear answer.
Last edited by Peace Dog on 2011-01-24 23:30:58, edited 2 times in total.
-
- Colonel
- Posts: 344
- Joined: 2007-01-13 07:59:02
- Gaming Interests: Falcon 4.0
- Editing Interests: Modeling
- Location: Hungary
Re: Adding squads to a campaign
Yes, save your changes.
You can set reinforcements if you want. Type number into appropriate field - arrival hour after starting (it carries a small randomness...?) - and set inactive flag.
You can set reinforcements if you want. Type number into appropriate field - arrival hour after starting (it carries a small randomness...?) - and set inactive flag.
Core 2 Duo E7300, Gigabyte EP43, 4 GB RAM (1066MHz), Shappire Radeon HD4850 1GB
-
- Newbie
- Posts: 6
- Joined: 2009-09-27 21:15:05
- Gaming Interests: Falcon 4.0
- Editing Interests: Terrains
Re: Adding squads to a campaign
Thanks, that's another question answered too
But doesn't explain the ctd's tho.
I had heard of the squadron store edits and rosters, there was a time i knew how to edit those. And just as a general question does tacedit 2.48 work correctly with FF5.53?
But doesn't explain the ctd's tho.
I had heard of the squadron store edits and rosters, there was a time i knew how to edit those. And just as a general question does tacedit 2.48 work correctly with FF5.53?
-
- Commander-In-Chief
- Posts: 9368
- Joined: 2000-07-31 22:01:01
- Gaming Interests: ArmA, ArmA 2, Falcon 4.0 and OFP.
- Editing Interests: All, I (try) to edit everything.
- Location: PMC
Re: Adding squads to a campaign
PMC Tactical Forum New User Registration please read new info here.
PMC since 1984
Editing knowledge, visit PMC Editing Wiki
The leading, most detailed and comprehensive modification made for the Vietnam War - Vietnam: The Experience homepage
View our videos in PMC Youtube channel
PMC Tactical forum Advanced Search is power.
"ALPHA BLACK TO PAPA BEAR. ALL RUSSIANS ARE TOAST. OVER."
PMC since 1984
Editing knowledge, visit PMC Editing Wiki
The leading, most detailed and comprehensive modification made for the Vietnam War - Vietnam: The Experience homepage
View our videos in PMC Youtube channel
PMC Tactical forum Advanced Search is power.
"ALPHA BLACK TO PAPA BEAR. ALL RUSSIANS ARE TOAST. OVER."
-
- Colonel
- Posts: 344
- Joined: 2007-01-13 07:59:02
- Gaming Interests: Falcon 4.0
- Editing Interests: Modeling
- Location: Hungary
Re: Adding squads to a campaign
Hey, you did not say anything about CTD...
I you did it I could help after your first post.
For FF - using the last unlocked cam files (5.3's) - if you add more than one squadron for an airbase using 'add squadron' option you will get CTD in the game. I do not know why. How can you avoid? Copy the existing squadrons, change thier ID accordingly to your goal, move or define their X/Y coordinates for the desired airbase, then change their home base ID on the appropriate tab. I can't remember the name of exact field, but you can find easily. If you wish to create naval based sqadrons you have to type 0 or ID - both works but FF team use not the 0 - of the ship grop where is the CV(N).
I tested and used this method, worked fine for me.
I you did it I could help after your first post.
For FF - using the last unlocked cam files (5.3's) - if you add more than one squadron for an airbase using 'add squadron' option you will get CTD in the game. I do not know why. How can you avoid? Copy the existing squadrons, change thier ID accordingly to your goal, move or define their X/Y coordinates for the desired airbase, then change their home base ID on the appropriate tab. I can't remember the name of exact field, but you can find easily. If you wish to create naval based sqadrons you have to type 0 or ID - both works but FF team use not the 0 - of the ship grop where is the CV(N).
I tested and used this method, worked fine for me.
Core 2 Duo E7300, Gigabyte EP43, 4 GB RAM (1066MHz), Shappire Radeon HD4850 1GB
-
- Newbie
- Posts: 6
- Joined: 2009-09-27 21:15:05
- Gaming Interests: Falcon 4.0
- Editing Interests: Terrains
Re: Adding squads to a campaign
Im not getting a problem with the add squadron'. Seems to be working fine, but i dont think im using a 5.3 cam. Is there a need to use the 5.3? Why not just set up a fresh korea wouldn't it be simpler?
You mentioned reinforcements using the inactive flag, i tried just entering a figure in the box, hoping that after x amount of time the squadrons would be replenished but it's not working. Ive got a situation where the US loose all their ac by late afternoon..
CTD i was getting was a silly reason... Everything seems quite stable atm, just some capture loops going on, and just trying to crack reinforcements.
You mentioned reinforcements using the inactive flag, i tried just entering a figure in the box, hoping that after x amount of time the squadrons would be replenished but it's not working. Ive got a situation where the US loose all their ac by late afternoon..
CTD i was getting was a silly reason... Everything seems quite stable atm, just some capture loops going on, and just trying to crack reinforcements.
-
- Colonel
- Posts: 344
- Joined: 2007-01-13 07:59:02
- Gaming Interests: Falcon 4.0
- Editing Interests: Modeling
- Location: Hungary
Re: Adding squads to a campaign
Because you have to save & exit then enter again in campaigns to make visible them + as I konw there is some randomness and delay before you can see the sqadron and where it fly mission. I have not tested this part since 2008...Peace Dog wrote:Im not getting a problem with the add squadron'. Seems to be working fine, but i dont think im using a 5.3 cam. Is there a need to use the 5.3? Why not just set up a fresh korea wouldn't it be simpler?
You mentioned reinforcements using the inactive flag, i tried just entering a figure in the box, hoping that after x amount of time the squadrons would be replenished but it's not working. Ive got a situation where the US loose all their ac by late afternoon..
CTD i was getting was a silly reason... Everything seems quite stable atm, just some capture loops going on, and just trying to crack reinforcements.
Ask RAM22, likely he is one of the most competent person in campaign editing.
Core 2 Duo E7300, Gigabyte EP43, 4 GB RAM (1066MHz), Shappire Radeon HD4850 1GB
-
- Newbie
- Posts: 6
- Joined: 2009-09-27 21:15:05
- Gaming Interests: Falcon 4.0
- Editing Interests: Terrains
Re: Adding squads to a campaign
Is Reinf = X all i need then to reinforce? Ive saved and exited but still nothing...
Thanks for the help
Thanks for the help
-
- Colonel
- Posts: 344
- Joined: 2007-01-13 07:59:02
- Gaming Interests: Falcon 4.0
- Editing Interests: Modeling
- Location: Hungary
Re: Adding squads to a campaign
+ inactive flag. As I have said even the save / exit the starting time of activity can be random. RAM22 said in ceratin cases to big time acceleration can cause problems.
I tested with F-111F and with F-22 about 2 years ago. I set 6 and 4 hour to reinf time. Sometimes they flew their first mission after 6-10 hour of nominal arriving.
I tested with F-111F and with F-22 about 2 years ago. I set 6 and 4 hour to reinf time. Sometimes they flew their first mission after 6-10 hour of nominal arriving.
Core 2 Duo E7300, Gigabyte EP43, 4 GB RAM (1066MHz), Shappire Radeon HD4850 1GB
-
- Newbie
- Posts: 6
- Joined: 2009-09-27 21:15:05
- Gaming Interests: Falcon 4.0
- Editing Interests: Terrains
Re: Adding squads to a campaign
Just trying to clarify something
Inactive flag and reinf=#
- a squadron that 'turns up' at time #(+6-10 hours). Effectively a reinforcement squadron arriving to theater.
..but...?
How can i 'replenish' an existing squadron? My squadron of Kfir have 0 aircraft left. What controls the reinforcement, (or is it supply?)
Supply is A grade as far as i can see, yet no aircraft are delivered to the squadron.
Just trying to clarify this area, easy to get words mistaken here.
Cheers, and how comes your campaign? Look forward to flying in it
Inactive flag and reinf=#
- a squadron that 'turns up' at time #(+6-10 hours). Effectively a reinforcement squadron arriving to theater.
..but...?
How can i 'replenish' an existing squadron? My squadron of Kfir have 0 aircraft left. What controls the reinforcement, (or is it supply?)
Supply is A grade as far as i can see, yet no aircraft are delivered to the squadron.
Just trying to clarify this area, easy to get words mistaken here.
Cheers, and how comes your campaign? Look forward to flying in it
-
- Colonel
- Posts: 344
- Joined: 2007-01-13 07:59:02
- Gaming Interests: Falcon 4.0
- Editing Interests: Modeling
- Location: Hungary
Re: Adding squads to a campaign and reinf
Supply is coming time to time for sqadrons and likey will ground troops too. I can't say more about this. Supply system is a black hole to me.
Core 2 Duo E7300, Gigabyte EP43, 4 GB RAM (1066MHz), Shappire Radeon HD4850 1GB
-
- Lt. General
- Posts: 1167
- Joined: 2006-05-24 22:01:01
- Gaming Interests: Falcon 4.0
- Editing Interests: All, I (try) to edit everything.
- Location: Arizona, USA
Re: Adding squads to a campaign and reinf
In AF you must have active airlifts landing for supply to happen. If your airlifters are not getting through then your reinforcement will not happen. Also, if enemy troops are too close to the base then reinforcement will not happen either (I think this is all versions of Falcon in this case).
Sherlock
Victurous te Saluto
Victurous te Saluto
-
- Banned user
- Posts: 43
- Joined: 2002-03-08 23:01:01
- Gaming Interests: Falcon 4.0
- Editing Interests: All, I (try) to edit everything.
- Location: Dallas, Texas
Re: Adding squads to a campaign and reinf
Airlift is required in FF as well.
-
- Banned user
- Posts: 208
- Joined: 2009-05-06 20:48:30
- Gaming Interests: Falcon 4.0
- Editing Interests: All, I (try) to edit everything.
Re: Adding squads to a campaign and reinf
by Sherlock » January 17, 2011, 06:29:36 PM
In AF you must have active airlifts landing for supply to happen. If your airlifters are not getting through then your reinforcement will not happen. Also, if enemy troops are too close to the base then reinforcement will not happen either (I think this is all versions of Falcon in this case).Sherlock
Victurous te Saluto
Sherlock
PMC Theater Developer
Posts: 1145
Joined: May 24, 2006, 05:01:01 PM
Location: Arizona, USA
Private message
True and True.............Squad's are resupplied\rebuilt\remanned\moved\removed\relocated.......etc, different than GU's in the Code.
You have a GTM and a ATM that doe's this for you.....but,methinks, you don't have the FULL picture.
ALOHA........
demer
(P.S. Molni your Right, but wrong..........Sorry I can't be more specific ATM)
In AF you must have active airlifts landing for supply to happen. If your airlifters are not getting through then your reinforcement will not happen. Also, if enemy troops are too close to the base then reinforcement will not happen either (I think this is all versions of Falcon in this case).Sherlock
Victurous te Saluto
Sherlock
PMC Theater Developer
Posts: 1145
Joined: May 24, 2006, 05:01:01 PM
Location: Arizona, USA
Private message
Hustler wrote:Airlift is required in FF as well.
True and True.............Squad's are resupplied\rebuilt\remanned\moved\removed\relocated.......etc, different than GU's in the Code.
You have a GTM and a ATM that doe's this for you.....but,methinks, you don't have the FULL picture.
ALOHA........
demer
(P.S. Molni your Right, but wrong..........Sorry I can't be more specific ATM)
-
- Banned user
- Posts: 43
- Joined: 2002-03-08 23:01:01
- Gaming Interests: Falcon 4.0
- Editing Interests: All, I (try) to edit everything.
- Location: Dallas, Texas
Re: Adding squads to a campaign and reinf
Telling us both we're right, that's useful.
-
- Newbie
- Posts: 6
- Joined: 2009-09-27 21:15:05
- Gaming Interests: Falcon 4.0
- Editing Interests: Terrains
Re: Adding squads to a campaign and reinf
Thanks for the info guys.
I will test it.
But i imagine the atm will be using quite a bit of info to determine how and when a squadron is supplied.
Hmm any idea whether initiative affects supply? I will test that too. (Assuming just setting team init in tacedit is enough).
Cheers.
Lol @ demer, yeah man your like the deep-throat of Falcon, haha.
I will test it.
But i imagine the atm will be using quite a bit of info to determine how and when a squadron is supplied.
Hmm any idea whether initiative affects supply? I will test that too. (Assuming just setting team init in tacedit is enough).
Cheers.
Lol @ demer, yeah man your like the deep-throat of Falcon, haha.
-
- Brig. General
- Posts: 455
- Joined: 2007-04-23 09:59:36
Re: Adding squads to a campaign and reinf
demer wrote:
I guess the GUs are resuplied via reached objectives. The only settings according to GU supply I can see in F4 browse is the range (values 100 or 500) on the unit level. I guess the unit should reach "stockpile" objective inside the range.
Another thing is amount of ammo. We can see ammo quantity for particular vehicles. Mentioned quantity could be the exact value or the "rate" of the 255 scaled bulk/sum. I am not sure in case of GUs. I am not sure the ammo is objective-resuply dependent. It looks it is perhaps time-dependent (programmers insurance to avoid passive GUs?).
I observed the group of fake-navals(GUs) fighting the true carrier group. There was no resuply vehicle in the unit. The unit/vehicles fired the salvo of long range missiles according to F4 browse quantity. But after about 10-15 minutes(part of time was compressed) were able to fire another salvo....
~35-40nm 1st salvo of 1quantity missiles, ~ 20 nm the second salvo.....9nm rocket salvo....~5? nm gun fight, unit destroyed, but damaged carrrier escort...there was no "stockpile" objective on route
....on the side the 2D world war is another story then....
Sorry for discussing it here, but we are not touching this topic very often.
So I guess to set all objectives as full suplied is not very realistic - I did not see many bridges storing fuel/gas/ammo in real. Another question is if the code counts on objective type (for example resupling possible just in army bases, cities etc - but I doubt)......?
Luk
So be more specific later please..Squad's are resupplied\rebuilt\remanned\moved\removed\relocated.......etc, different than GU's in the Code.
....(P.S. Molni your Right, but wrong..........Sorry I can't be more specific ATM)
I guess the GUs are resuplied via reached objectives. The only settings according to GU supply I can see in F4 browse is the range (values 100 or 500) on the unit level. I guess the unit should reach "stockpile" objective inside the range.
Another thing is amount of ammo. We can see ammo quantity for particular vehicles. Mentioned quantity could be the exact value or the "rate" of the 255 scaled bulk/sum. I am not sure in case of GUs. I am not sure the ammo is objective-resuply dependent. It looks it is perhaps time-dependent (programmers insurance to avoid passive GUs?).
I observed the group of fake-navals(GUs) fighting the true carrier group. There was no resuply vehicle in the unit. The unit/vehicles fired the salvo of long range missiles according to F4 browse quantity. But after about 10-15 minutes(part of time was compressed) were able to fire another salvo....
~35-40nm 1st salvo of 1quantity missiles, ~ 20 nm the second salvo.....9nm rocket salvo....~5? nm gun fight, unit destroyed, but damaged carrrier escort...there was no "stockpile" objective on route
....on the side the 2D world war is another story then....
Sorry for discussing it here, but we are not touching this topic very often.
So I guess to set all objectives as full suplied is not very realistic - I did not see many bridges storing fuel/gas/ammo in real. Another question is if the code counts on objective type (for example resupling possible just in army bases, cities etc - but I doubt)......?
Luk
-
- Recruit
- Posts: 69
- Joined: 2002-07-08 22:01:01
- Gaming Interests: Falcon 4.0
- Editing Interests: All, I (try) to edit everything.
- Location: NYC, USA
Re: Adding squads to a campaign and reinf
Only the ATM is fairly accurate with supply/fuel as ground units don't take into consideration fuel rates like aircraft do .
That would be next "todo" in my book on fuel/supply issue .
Same on weapons to 255 value means unlimited amounts and as in aircraft weapons loadouts in AF anything brought back does get registered back into supply chain . I am pretty sure nothing like that is available in GTM because there is no squadron stores either being used .
That would be another plus to be able to set priority to which type of unit and also maybe were. This way you could have say sa2 with higher priority to missile/weapon supply than a ak47 or sa7 .
That would be next "todo" in my book on fuel/supply issue .
Same on weapons to 255 value means unlimited amounts and as in aircraft weapons loadouts in AF anything brought back does get registered back into supply chain . I am pretty sure nothing like that is available in GTM because there is no squadron stores either being used .
That would be another plus to be able to set priority to which type of unit and also maybe were. This way you could have say sa2 with higher priority to missile/weapon supply than a ak47 or sa7 .
Last edited by Ed_1 on 2011-01-19 21:24:55, edited 1 time in total.
-
- Banned user
- Posts: 43
- Joined: 2002-03-08 23:01:01
- Gaming Interests: Falcon 4.0
- Editing Interests: All, I (try) to edit everything.
- Location: Dallas, Texas
Re: Adding squads to a campaign and reinf
The range field in the UCD file determines the max range the unit can move with full supply. The valid numbers are 0 -999 and is in kilometers. Ammo for GU's is resupplied every 60 minute campaign cycle and it doesn't come from anywhere. You mention the number 255 when referring to ammo, that number means unlimited. Valid numbers for less than unlimited is 0-254.
Luk wrote:So be more specific later please.
I guess the GUs are resuplied via reached objectives. The only settings according to GU supply I can see in F4 browse is the range (values 100 or 500) on the unit level. I guess the unit should reach "stockpile" objective inside the range.
Another thing is amount of ammo. We can see ammo quantity for particular vehicles. Mentioned quantity could be the exact value or the "rate" of the 255 scaled bulk/sum. I am not sure in case of GUs. I am not sure the ammo is objective-resuply dependent. It looks it is perhaps time-dependent (programmers insurance to avoid passive GUs?).
I observed the group of fake-navals(GUs) fighting the true carrier group. There was no resuply vehicle in the unit. The unit/vehicles fired the salvo of long range missiles according to F4 browse quantity. But after about 10-15 minutes(part of time was compressed) were able to fire another salvo....
~35-40nm 1st salvo of 1quantity missiles, ~ 20 nm the second salvo.....9nm rocket salvo....~5? nm gun fight, unit destroyed, but damaged carrrier escort...there was no "stockpile" objective on route
....on the side the 2D world war is another story then....
Sorry for discussing it here, but we are not touching this topic very often.
So I guess to set all objectives as full suplied is not very realistic - I did not see many bridges storing fuel/gas/ammo in real. Another question is if the code counts on objective type (for example resupling possible just in army bases, cities etc - but I doubt)......?
Luk
Last edited by Hustler on 2011-01-20 14:18:30, edited 1 time in total.
-
- Brig. General
- Posts: 455
- Joined: 2007-04-23 09:59:36
Re: Adding squads to a campaign and reinf
Thanks for clarification.
What about carriers? I doubt there are any resuply helicopter flights. Are carrier based squadrons resuplied via the time factor or have unlimited resources? (cannot recal if I have seen low ammo for F14/18).
I doubt it is dependent on presence of the ammo ship.
Luk
What about carriers? I doubt there are any resuply helicopter flights. Are carrier based squadrons resuplied via the time factor or have unlimited resources? (cannot recal if I have seen low ammo for F14/18).
I doubt it is dependent on presence of the ammo ship.
Luk
-
- Banned user
- Posts: 43
- Joined: 2002-03-08 23:01:01
- Gaming Interests: Falcon 4.0
- Editing Interests: All, I (try) to edit everything.
- Location: Dallas, Texas
Re: Adding squads to a campaign and reinf
Naval Units are an exception to almost every rule. They exist but there is very little code written to support them. IMO you guys need to quit playing with the Navy. They always have supply, they go no where, there is no Tasking Manager assigning them, to get things to fly off of them you have to trick the code, your AI can't land..........
You can hope, wish, pray all you want, but there isn't a Navy in Falcon.
You can hope, wish, pray all you want, but there isn't a Navy in Falcon.
Luk wrote:Thanks for clarification.
What about carriers? I doubt there are any resuply helicopter flights. Are carrier based squadrons resuplied via the time factor or have unlimited resources? (cannot recal if I have seen low ammo for F14/18).
I doubt it is dependent on presence of the ammo ship.
Luk
-
- Brig. General
- Posts: 455
- Joined: 2007-04-23 09:59:36
Re: Adding squads to a campaign and reinf
I did not say it clear, sorry. I meant carrier based squadrons. Ok, I see these naval squadrons were not designed for human drived flights. But still - they play an important role even in the original 1998 F4 campaigns. So I am interested how are these squads resuplied.
I doubt it is via resuply flights. Naval ships are unfinished and schematic (as you said), so the only remaining way is via time factor or unlimited ammo for them...?
Luk
I doubt it is via resuply flights. Naval ships are unfinished and schematic (as you said), so the only remaining way is via time factor or unlimited ammo for them...?
Luk
-
- Banned user
- Posts: 43
- Joined: 2002-03-08 23:01:01
- Gaming Interests: Falcon 4.0
- Editing Interests: All, I (try) to edit everything.
- Location: Dallas, Texas
Re: Adding squads to a campaign and reinf
They do not appear to be resupplied via airlift, so we assume they have unlimited stores.
-
- Colonel
- Posts: 344
- Joined: 2007-01-13 07:59:02
- Gaming Interests: Falcon 4.0
- Editing Interests: Modeling
- Location: Hungary
Re: Adding squads to a campaign and reinf
I played long time ago full campaign with FFx.x. I can remember that my suqadron could run out from AIM-54s BUT carrer squadron got resupply from AIM-54. I don't know how, but I was very happy to see this.Hustler wrote:They do not appear to be resupplied via airlift, so we assume they have unlimited stores.
Core 2 Duo E7300, Gigabyte EP43, 4 GB RAM (1066MHz), Shappire Radeon HD4850 1GB
-
- Recruit
- Posts: 69
- Joined: 2002-07-08 22:01:01
- Gaming Interests: Falcon 4.0
- Editing Interests: All, I (try) to edit everything.
- Location: NYC, USA
Re: Adding squads to a campaign and reinf
Have not checked but here my guess . since you do have squadron stores for aircraft in SSD, it probably uses this but since there no squadron stores in a higher grouping in cam file data it uses the GTM to resupply , which is timed event .molnibalage wrote:I played long time ago full campaign with FFx.x. I can remember that my squadron could run out from AIM-54s BUT carrer squadron got resupply from AIM-54. I don't know how, but I was very happy to see this.Hustler wrote:They do not appear to be resupplied via airlift, so we assume they have unlimited stores.
-
- Commander-In-Chief
- Posts: 9368
- Joined: 2000-07-31 22:01:01
- Gaming Interests: ArmA, ArmA 2, Falcon 4.0 and OFP.
- Editing Interests: All, I (try) to edit everything.
- Location: PMC
Re: Adding squads to a campaign and reinf
Seems like this discussion is getting really close to the fuel/supply topic, I'd like to remind that we are discussing about adding squadrons to a campaign and reinforcements, so please lets focus solely on the squadron reinforcement "supply" in this topic.
Thanks.
Thanks.
PMC Tactical Forum New User Registration please read new info here.
PMC since 1984
Editing knowledge, visit PMC Editing Wiki
The leading, most detailed and comprehensive modification made for the Vietnam War - Vietnam: The Experience homepage
View our videos in PMC Youtube channel
PMC Tactical forum Advanced Search is power.
"ALPHA BLACK TO PAPA BEAR. ALL RUSSIANS ARE TOAST. OVER."
PMC since 1984
Editing knowledge, visit PMC Editing Wiki
The leading, most detailed and comprehensive modification made for the Vietnam War - Vietnam: The Experience homepage
View our videos in PMC Youtube channel
PMC Tactical forum Advanced Search is power.
"ALPHA BLACK TO PAPA BEAR. ALL RUSSIANS ARE TOAST. OVER."
-
- Recruit
- Posts: 69
- Joined: 2002-07-08 22:01:01
- Gaming Interests: Falcon 4.0
- Editing Interests: All, I (try) to edit everything.
- Location: NYC, USA
Re: Adding squads to a campaign and reinf
Well the OP question was answered in first few posts .Snake Man wrote:Seems like this discussion is getting really close to the fuel/supply topic, I'd like to remind that we are discussing about adding squadrons to a campaign and reinforcements, so please lets focus solely on the squadron reinforcement "supply" in this topic.
Thanks.
Ed
-
- Banned user
- Posts: 208
- Joined: 2009-05-06 20:48:30
- Gaming Interests: Falcon 4.0
- Editing Interests: All, I (try) to edit everything.
Re: Adding squads to a campaign and reinf
GU's are Reinforced in Falcon...........
AU's are Replaced\Replaned.......
Edit.......Sorry PeaceDog and other's, I was a bit ED_1 Vague on the statement's....... (No Offense M8)
I will try to explain abit, in case you did not already know it all, like some people think they do :
So........here goe's it in the Falcon VUv2 Engine.....as far as I can understand it......!!!!
Gu's are Reinforced at Defined Interval's........what has to happen for this event to occur ? Nothing!!!! Falcon quite easily give's the GTM free reign on this. Do they get the "Cookie's for Controlling an Objective" (i.e. Doe's the Obj hand over it's Fuel\Supply and add it to the Pool) Yes and the Player Team get's POINT's also!!!!!
AU's (Squad's) on the otherhand are Replaned\Re-Stored.......Get it....Replaned\Re-Stored by a totally different arqument in Falcon.....!!!!!!!!!! HAHAHA
Soooooo.......You went to your F4Patch\.cfg and made Falcon use these big 4 ship package's.....cool
But, you only have 16\whatever available AC in your Squadron.........So by Day2 you are out of AC's\SSD's......Hmmmmm.
That's a start,
demer
(BTW, I don't know what I don't know, BUT, I can find out what I don't know!!!)
AU's are Replaced\Replaned.......
Edit.......Sorry PeaceDog and other's, I was a bit ED_1 Vague on the statement's....... (No Offense M8)
I will try to explain abit, in case you did not already know it all, like some people think they do :
So........here goe's it in the Falcon VUv2 Engine.....as far as I can understand it......!!!!
Gu's are Reinforced at Defined Interval's........what has to happen for this event to occur ? Nothing!!!! Falcon quite easily give's the GTM free reign on this. Do they get the "Cookie's for Controlling an Objective" (i.e. Doe's the Obj hand over it's Fuel\Supply and add it to the Pool) Yes and the Player Team get's POINT's also!!!!!
AU's (Squad's) on the otherhand are Replaned\Re-Stored.......Get it....Replaned\Re-Stored by a totally different arqument in Falcon.....!!!!!!!!!! HAHAHA
Soooooo.......You went to your F4Patch\.cfg and made Falcon use these big 4 ship package's.....cool
But, you only have 16\whatever available AC in your Squadron.........So by Day2 you are out of AC's\SSD's......Hmmmmm.
That's a start,
demer
(BTW, I don't know what I don't know, BUT, I can find out what I don't know!!!)
-
- Colonel
- Posts: 344
- Joined: 2007-01-13 07:59:02
- Gaming Interests: Falcon 4.0
- Editing Interests: Modeling
- Location: Hungary
Re: Adding squads to a campaign and reinf/supply :)
How can I set the ground troops reinforcement? The inactive flag + hours value do not work. Ground units visible from the beginning of campaign.
Core 2 Duo E7300, Gigabyte EP43, 4 GB RAM (1066MHz), Shappire Radeon HD4850 1GB
Who is online
Users browsing this forum: No registered users and 0 guests