PMC Tactical forums

Please give some help how to change and which values via f4browse in order to have/ have not the M symbol in F-16 blk52+ RWR when the Aim 120 go active... please help!!!

Geraki wrote:Please give some help how to change and which values via f4browse in order to have/ have not the M symbol in F-16 blk52+ RWR when the Aim 120 go active... please help!!!

What is your goal exactly? What do you want to see in which version? The RWR display is not AC specific...

molnibalage wrote:

Geraki wrote:Please give some help how to change and which values via f4browse in order to have/ have not the M symbol in F-16 blk52+ RWR when the Aim 120 go active... please help!!!

What is your goal exactly? What do you want to see in which version? The RWR display is not AC specific...

Look Mystic_J had done a patch that eliminate the ability of the HAF F-16 blk52+ to have M when the aim 120 go active.. I want to know how to give back the ability to display the M symbol in RWR .. Which are the values via f4browse

Geraki wrote:

molnibalage wrote:

Geraki wrote:Please give some help how to change and which values via f4browse in order to have/ have not the M symbol in F-16 blk52+ RWR when the Aim 120 go active... please help!!!

What is your goal exactly? What do you want to see in which version? The RWR display is not AC specific...

Look Mystic_J had done a patch that eliminate the ability of the HAF F-16 blk52+ to have M when the aim 120 go active.. I want to know how to give back the ability to display the M symbol in RWR .. Which are the values via f4browse

In which version? Did you examine olnly the HAF F-16 blk52+? All other AC have to be suffered by the same effect. If your HAF F-16 blk52+ RWR does not show 'M' if an AIM-120 uses its own radar no one of AC will be different. What do you see insted 'M' in the pacth?

All the F-16 versions in Aegean theater with that patch has disable the M symbol when the aim120 go active.. no warning tone no symbol M in RWR .. i will ask again!!! does anyone know which values must i change back in order to have the M symbol in RWR when the aim120 go actice... ? molnibalage if you can help please tell me the specific values via f4browse .... , or tell me which values represent the RWR .. and assigned warning symbols M ...

Check your PM.

Normal private messages are fine, but if the posted stuff is anything we can use here in the forum/wiki, but maybe bit technical or so... just please post it here. I don't mind at all.

We encourage everyone to share information and post it publicly, no matter how technical and difficult to understand it is

FF use this numbers to define RWR symbols for HSD/HAD and RWR instrument too. Likely other version use the same input.


SYMBOL NUMBER RWR DRAWS THIS
RWRSYM_NONE = 0,
RWRSYM_UNKNOWN = 1,
RWRSYM_ADVANCED_INTERCEPTOR = 2, BAT
RWRSYM_BASIC_INTERCEPTOR = 3, Chevron
RWRSYM_ACTIVE_MISSILE = 4, M
RWRSYM_HAWK = 5, H
RWRSYM_PATRIOT = 6, P
RWRSYM_SA2 = 7, 2
RWRSYM_SA3 = 8, 3
RWRSYM_SA4 = 9, 4
RWRSYM_SA5 = 10, 5
RWRSYM_SA6 = 11, 6
RWRSYM_SA8 = 12, 8
RWRSYM_SA9 = 13, 9
RWRSYM_SA10 = 14, 10
RWRSYM_SA13 = 15, 13
RWRSYM_AAA = 16, A
RWRSYM_SEARCH = 17, S
RWRSYM_NAVAL = 18, BOAT
RWRSYM_CHAPARAL = 19, C
RWRSYM_SA15 = 20, 15
RWRSYM_NIKE = 21, N
RWRSYM_A1 = 22, dot over A
RWRSYM_A2 = 23, 2 dots over A
RWRSYM_A3 = 24,
RWRSYM_PDOT = 25, dot over P
RWRSYM_PSLASH = 26, ! over P
RWRSYM_UNK1 = 27, U
RWRSYM_UNK2 = 28, dot over U
RWRSYM_UNK3 = 29, 2 dots over U
RWRSYM_KSAM = 30, C
RWRSYM_V4 = 32, 4
RWRSYM_V5 = 33, 5
RWRSYM_V6 = 34,
RWRSYM_V14 = 35, 14
RWRSYM_V15 = 36, 15
RWRSYM_V16 = 37, 16
RWRSYM_V18 = 38, 18
RWRSYM_V19 = 39, 19
RWRSYM_V20 = 40, 20
RWRSYM_V21 = 41, 21
RWRSYM_V22 = 42, 22
RWRSYM_V23 = 43, 23
RWRSYM_V25 = 44, 25
RWRSYM_V27 = 45, 27
RWRSYM_V29 = 46, 29
RWRSYM_V30 = 47, 30
RWRSYM_V31 = 48, 31
RWRSYM_VP = 49, P
RWRSYM_VPD = 50, PD
RWRSYM_VA = 51, A
RWRSYM_VB = 52, B
RWRSYM_VS = 53, S
RWRSYM_Aa = 54, ! over A
RWRSYM_Ab = 55, !! over A
RWRSYM_Ac = 56, !!! over A
RWRSYM_MIB_F_S = 57, F S
RWRSYM_MIB_F_A = 58, F A
RWRSYM_MIB_F_M = 59, F M
RWRSYM_MIB_F_U = 60, F U
RWRSYM_MIB_F_BW = 61, F or Chevron
RWRSYM_MIB_BW_S = 62, S or Chevron
RWRSYM_MIB_BW_A = 63, A or Chevron
RWRSYM_MIB_BW_M = 64, M or Chevron
RWRSYM_A = 65, A
RWRSYM_F = 70, F
***Below used for Aircraft: Symbol drawn is the number you wish -100
RWRSYM_0 = 100, 0
RWRSYM_27 = 127, 27
RWRSYM_155 = 255, 155
The Numbers 66 thru 99 can draw a letter based on the HEX value of the ASCII character.

In F4Browse this box define the HAD / HSD display.



For RWR instrument check the radtypes.lst file in simdata.zip. In \radar directory you can find radar dat files. The no. of line in Radtype.lst makes connection between simdata.zip and \terrdata\ojbject DB. For ex. check the Fan Song. It is the 39th in radtype.lst, it will be used for RCD39. RWR instrument uses the dat file. Radar can perfrom search, track, lock, ect. but symbols have to be the same for all. For Fan Song you can see this. If you check RCD39 you can see that RWR no. is 7.

Rwrsymbolsearch1 7
Rwrsymbolsearch2 7
Rwrsymbolsearch3 7
Rwrsymbolacuire 7
Rwrsymbolguide 7

These lines mean even you set good HSD / HAD sysmbol you can see different lables on you RWR.

You are the master....

Question can we have without exe edit more symbols in RWR or HSD....??

Also can we have template.te from saved TE .. that have preplaned ST in order to draw e.g boxes and squares which represents exersice areas ??.. i mean to have fixed ini/tac template with stable exersices areas in order to desplayed in HSD!!! and not to add them in every mission which we create ..

Some quick instractions in order to have warning" M" in RWR when Mica ir lanched ?? for testing !!!